| Length | 350 mm |
| Weight | 2.4 kg |
| Cutting range | max. 40 mm dia. |
| Pressing time | 3 s to 5 s (depending on the press cross-section) |
| Pressing force | 60 kN |
| Hub | 42 mm |
| Number of pressings | approx. 300 at 150 mm² Cu DIN |
| Number of cuts | approx. 110 at 4 x 70 mm² NYY |
| Punching performance | up to Ø 64 mm round, up to 92 x 92 mm square |
| Operating pressure | max. 700 bar |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
| PART NO. | Description |
|---|---|
| PK60UNV | Hydraulic universal head |
| PART NO. | Description |
|---|---|
| UC26 | Cutting die up to max. 26 mm dia. for cutting stranded Cu and Al conductors without armouring |
| UC40 | Cutting die to max. 40 mm dia. |
| UCAC107 | Cutting die 107 mm² type AC for catenary wires in railway construction |
| UCACSR | Cutting die for ACSR overhead lines and steel |
| UCBC110 | Cutting die 110 mm² type BC for catenary wires in railway construction |
| UCBC120 | Cutting insert 120 mm² type BC for catenary wires in railway construction |
| UCBC150 | Cutting die 150 mm² type BC for catenary wires in railway construction |
| UCBC85 | Cutting die 85 mm² type BC for catenary wires in railway construction |
| PART NO. | Description |
|---|---|
| USDBU | Base unit for stripping without cable stop |
| USDBUCS | Base unit for stripping with cable stop |
| USDCS | Cable stop for base unit |
| USDHOOK | Hook for base unit to remove insulation |
| USDB9 | Blade with 9 mm dia. for base unit for stripping |
| USDB14 | Blade with 14 mm dia. for base unit for stripping |
| USDB20 | Blade with 20 mm dia. for base unit for stripping |
| USDB22 | Blade with 22 mm dia. for base unit for stripping |
| USDB21 | Blade with 21 mm dia. for base unit for stripping |
| USDB67 | Blade with 6.7 mm dia. for base unit for stripping |
| USDB82 | Blade with 8.2 mm dia. for base unit for stripping |
| USDB99 | Blade with 9.9 mm dia. for base unit for stripping |
| USDB107 | Blade with 10.7 mm dia. for base unit for stripping |
| USDB116 | Blade with 11.6 mm dia. for base unit for stripping |
| USDB125 | Blade with 12.5 mm dia. for base unit for stripping |
| USDB133 | Blade with 13.3 mm dia. for base unit for stripping |
| USDB148 | Blade with 14.8 mm dia. for base unit for stripping |
| USDB156 | Blade with 15.6 mm dia. for base unit for stripping |
| USDB168 | Blade with 16.8 mm dia. for base unit for stripping |
| USDB174 | Blade with 17.4 mm dia. for base unit for stripping |
| USDB185 | Blade with 18.5 mm dia. for base unit for stripping |
| USDB235 | Blade with 23.5 mm dia. for base unit for stripping |
| USDBBOX | Case for blades with 18 compartments including magnet for removal |
| KKEKSDUNV | Case for up to six base units and USDBBOX |
| PART NO. | Description |
|---|---|
| UA22 | Adapter for crimping dies of Series 22 |
| UA60ID | Stepless mandrel crimp insert for Cu and Al tubular cable lugs and connectors from 70 to 400 mm² |
| UKWF240 | Stepless square crimp insert for ferrules from 35 to 240 mm² |
| PART NO. | Description |
|---|---|
| UCD3515 | Cutting die for profile conductors 35 x 15 |
| UCD3575 | Cutting die for profile conductors 35 x 7.5 |
| UCF | Cutting die for laminated Cu bus bars, max. width 37.5 mm |
| UCM10 | Cutting die for threaded rods M10 metric |
| UCM12 | Cutting die for threaded rods M12 metric |
| UCM6 | Cutting die for threaded rods M6 metric |
| UCM8 | Cutting die for threaded rods M8 metric |
| PART NO. | Description |
|---|---|
| UA6P | Hole punch adapter to 64 mm, 92 x 92 mm and 46 x 92 mm dia. |
| UPD6 | Die for punching DIN rails 35x15; 32x15x9; 35x7.5 |