EK 50 ML Electromechanical crimping tool 0.14 - 50 mm²

The Klauke micro with intuitive PowerSense function combines the benefits of manual crimping tools with the convenience of battery powered hydraulic crimping tools
Excellent crimping results with minimum effort

Show Less

Features

Simple and safe: One-button operating concept for controlling all tool functions
Electronic control with locking function monitors full closing of the dies
Simple and safe: Automatic retraction when operation is complete
Manual retract as required
Motor stall protection
Ergonomic 2C housing in the Klauke "In-line Design"
Fastening eye for use with balancer or as fall protection in field applications
Very low weight and high speed for maximum efficiency
Powerful drive technology for fatigue proof operations
Powerful 10.8 V Li-Ion battery with charge status display
LED for work area illumination
Maintenance display via LED

suitable for

50-series interchangeable crimping dies

Specifications

Crimping force	max. 15 kN
Crimping range	0.14 - 50 mm²
Crimping cycle	< 1.5 s (based on connection material)
Number of crimps	approx. 300 for 10 mm² Cu DIN 46234 / per battery charge
Battery voltage	10.8 V
Battery capacity	1.5 Ah, Li-Ion
Battery charging time	approx. 40 min.
Weight including battery	0.96 kg
Ambient temperature	-10 °C to + 40 °C

*Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

Compatibility

Tubular cable lugs and connectors – Cu

suitable for	Crimping range mm²	Crimping dies available
Tubular cable lugs and connectors - Cu, standard design	0,75 - 10	Crimping dies R 50, indent crimping
Tubular cable lugs and connectors - Cu, standard design	6 - 25	Crimping dies R 50, hexagonal crimp
Tubular cable lugs and compression joints for solid conductors - Cu	1,5 - 10	Crimping dies M 50

Compression cable lugs and connectors to DIN - Cu

suitable for	Connecting material	Crimping range mm²	Crimping profile	Crimping dies available
Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu		6 - 25		Crimping dies D 50

Solderless terminals, connectors and pin terminals to DIN - Cu

suitable for	Connecting material	Crimping range mm²	Crimping profile	Crimping dies available
Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu		0,5 - 10		Crimping dies Q 50

Cable end sleeves

suitable for	Connecting material	Crimping range mm²	Crimping profile	Crimping dies available
Cable end sleeves		0,14 - 50		Crimping dies AE 50

Cable connections, insulated and non-insulated

suitable for	Connecting material	Crimping range mm²	Crimping profile	Crimping dies available
Insulated cable connections, single crimping		0,5 - 16		Crimping dies IS 50, simple crimping
Insulated cable connections, double crimping		0,1 - 6		Crimping dies IS 50, double crimping
Non-insulated receptacles		0,25 - 6		Crimping dies CR 50
For stud and shielded sleeves, BNC plugs for coax cable RG 58, 59, 62 and 71	-		-	Crimping dies BNC 50
Turned pin receptacle, pin connectors	-	0,1 - 4		Crimping dies SB 50

Ordering Information

PART NO.	Description
EK50ML	Electromechanical crimping tool 0.14 - 50 mm²

DISPLAY STANDARD EQUIPMENT

PART NO.	Description
RAML1	10.8 V / 1.5 Ah, Li-Ion (16.2 Wh) battery
LGML1	Charger for 10.8 V Li-Ion batteries, 230V
IS5071	Crimping die for insulated connector 0.5 - 6 mm²
KKEK50ML	Hard plastic carrying case

Variants

PART NO.	Description
LBOXXEK50ML	L-BOXX with electromechanical crimping tool EK 50 ML 0.14 - 50 mm² and extensive additional equipment
EK50ML-L	Electromechanical crimping tool 0.14 - 50 mm² with RAML1 battery, without charger, crimping die, case

Do you have a question or suggestion for us? Please get in touch, we'll be happy to hear from you!

Training courses

Stay safe with first-hand technical expertise: Klauke System Training.