Electrical connection systems
-
Insulated crimped cable lugs -
Insulated solderless terminals, fork type -
Insulated pin terminals -
Insulated pin receptacles -
Insulated pin receptacles -
Insulated pin receptacles, fully insulated -
Insulated pin receptacles, fully insulated -
Insulated receptacles, tinned brass -
Insulated receptacles, tin plated bronze -
Insulated receptacles, multiple type -
Insulated receptacles, fully insulated -
Insulated tabs -
Insulated end splices -
Insulated butt connectors -
Insulated butt connectors with heat shrink insulation -
Insulated parallel connectors -
Cable end-sleeves acc. to DIN, Cu -
Punched cable lugs, Cu -
Compression cable lugs according to DIN, Al -
Compression cable lugs, Al -
Solderless terminals according to DIN, Cu -
Compression cable lugs according to DIN, Cu -
Tubular cable lugs, stainless steel -
Butt connectors, stainless steel -
Tubular cable lugs, Cu, standard type -
Tubular cable lugs, Cu, fork type -
Tubular cable lugs, Cu, standard type -
Tubular cable lugs for switch cabinet connections, standard type -
ST 23 B Pocket box with cable end-sleeves 0.25-1 mm² -
ST 21 B Pocket box with cable end-sleeves 0.5-2.5 mm² -
ST 22 B Pocket box with cable end-sleeves 4-16 mm² -
Non-insulated receptacles -
Non-insulated receptacles with branch -
Non-insulated receptacles with locking latch -
Non-insulated receptacles with lateral conductor connector -
Non-insulated tabs -
Non-insulated tabs, angled version -
Non-insulated tabs, straight version -
Non-insulated tabs for soldering -
Non-insulated plug distributor -
Insulated cable end-sleeve according to DIN with Easy-Entry -
Insulated cable end-sleeves to DIN with Easy-Entry, colour code 1 -
Insulated cable end-sleeves to DIN with Easy-Entry, colour code 2 -
Insulated cable end-sleeves with lug -
Designation rings, numbers -
Designation ring numbers 0-9 -
Designation rings letters A - Z -
A 300 Insert fork for designation ring -
Tubular soldering sleeves, CuZn -
Compression cable lugs, Al/Cu -
Compression cable lugs, Al/Cu with Cu eye -
Compression joint according to DIN, Al -
Compression joint, Al, - barrier version -
Compression joint, Al, standard type -
Insulated solderless terminals, Cu with Easy-Entry -
Insulated pin terminals, Cu with Easy-Entry -
Angled compression cable lugs, Cu, 90° angled -
Angled compression cable lugs, Cu, 45° offset -
Tubular cable lugs, Ni -
Tubular cable lugs, Ni, fork type -
Butt connectors, Ni -
Angled tubular cable lugs, Cu, 90° angled, standard type -
Angled tubular cable lugs, Cu, 45° offset, standard type -
ST 15 B Pocket box with insulated twin cable end-sleeves 2 x 0.75 - 2 x 2.5 mm² -
ST 1 B pocket box with insulated cable end-sleeves 0.5-2.5 mm², DIN 46228 Part 4, colour code 1 -
ST 11 B pocket box with insulated cable end-sleeves 0.5-2.5 mm², DIN 46228 Part 4 -
ST 31 B pocket box with insulated Cable end-sleeves 0.5-2.5 mm², DIN 46228 Part 4, colour code 2 -
ST 12 B pocket box with insulated Cable end-sleeves 4-16 mm², DIN 46228 Part 4 -
ST 2 B pocket box with insulated Cable end-sleeves 4-16 mm², DIN 46228 Part 4, colour code 1 -
ST 32 B pocket box with insulated Cable end-sleeves 4-16 mm², DIN 46228 Part 4, colour code 2 -
ST 3 B pocket box with insulated Cable end-sleeves 0.25-1 mm², DIN 46228 Part 4, colour code 1 -
ST 13 B pocket box with insulated cable end-sleeves 0.25-1 mm², DIN 46228 Part 4 and similar, colour code 1 -
ST 33 B pocket box with insulated Cable end-sleeves 0.25-1 mm², DIN 46228 Part 4 and similar, colour code 2 -
GR 4698 DO Pocket box with insulated cable end-sleeves 0.5 mm² -
GR 4708 DO Pocket box with insulated cable end-sleeves 0.75 mm² -
GR 4718 DO Pocket box with insulated cable end-sleeves 1 mm² -
GR 4728 DO Pocket box with insulated cable end-sleeves 1.5 mm² -
GR 4738 DO Pocket box with insulated cable end-sleeves 2.5 mm² -
ST 5 L assortment of empty pocket boxes -
Insulation sleeves -
Flexible connector, plug width 2.8 mm -
Flexible connector, plug width 4.8 mm -
Flexible connector, plug width 6.3 mm -
Polyamide connector, plug width 2.8 and 6.3 mm -
Flexible circuit distributor, tab width 2.8 mm -
Flexible circuit distributor, plug connector width 6.3 mm -
Insulated cable end-sleeves for short circuit protected conductors -
Screw-in branch clamps, Cu, 2 screws -
Compression joints, Al/Cu -
Compression joint with Cu bolts, Al -
Reducing compression joints, Al, barrier type -
Reduction-compression joints, Al -
Solderless terminals, Cu, fork type -
Pin terminals according to DIN, Cu -
Compression cable lugs DIN special type, Cu with 2 slots -
Compression cable lugs, special type, Cu with 1 slot, double crimping -
Compression cable lugs, special type, Cu with 2 slots, double crimping -
Butt connectors, Cu, standard type -
Parallel connectors, Cu, standard type -
T-connectors, Cu, standard type -
Cross-connectors, Cu, standard type -
SK 30 B Steel assortment box with cable end-sleeves and crimping tool -
SK 32 B Steel assortment box with cable end-sleeves and crimping tool -
Insulated twin cable end-sleeves -
C-type branch clamps, Cu -
C-type branch clamps, Cu, multi-purpose clamps -
Branch clamps in H-type, Cu -
Contact grease compound for branch clamps -
Compression joint according to DIN, Al, full tension -
Insulated solderless terminals for meter connections, Cu, fork type -
Compression joints according to DIN, Cu -
Compression joint, Cu -
Compression joint for cable connections 10-30 kV, Cu, standard type -
Compression joint for cable connections 10-30 kV, Cu - longitudinal type -
Compression joints according to DIN, Cu -
Reducing sleeves, Cu -
Insulated tubular cable lugs, Cu, standard type -
Insulated butt connectors, Cu, standard type -
Tubular cable lugs, blue connection®, Cu -
Butt connectors, blue connection®, Cu -
SK 45 B Steel assortment box with insulated cable end sleeves and crimping tool -
SK 47 B Steel assortment box with insulated cable end sleeves and crimping tool -
SK 30/3 P Plastic assortment box plastic with insulated cable end sleeves and tools -
SK 30/3 S Plastic assortment box with insulated cable end sleeves and crimping tool -
SK 43 NB Steel assortment box with insulated cable end sleeves and tools -
SK 65 B Steel assortment box with tubular cable lugs and crimping tool -
SK 50 B Steel assortment box with DIN compression cable lugs and crimping tool -
Insulated cable end-sleeves, strip form -
Insulated cable end-sleeves, small coil -
Insulated cable end-sleeves, large coil -
Screw connectors for shielded copper wires -
Compression joint according to DIN, Al/St -
Solderless connectors according to DIN, short type -
Solderless connectors according to DIN, Cu, long type -
MK 230 B 507 Steel assortment box with insulated cable connections and crimping tool -
SK 82 P Plastic assortment box with insulated cable connections and tools -
SK 82 S Plastic assortment box with insulated cable connections and crimping tool -
SK 30 L Steel carrying case -
SK 32 L Steel carrying case -
SK 4 L Steel carrying case -
SK 43 L Steel carrying case -
MK 55 Steel carrying case -
MK 210 L Steel carrying case -
MK 220 L Steel carrying case -
MK 230 L Steel carrying case -
SK 65 L Steel carrying case -
MK 18 Steel carrying case -
MK 22 Steel carrying case -
KKPE Plastic case -
MKU Steel carrying case with wheels -
TT2 Carrying case -
TT4 Carrying case -
Screw connector for street lighting with threaded pin, tin plated -
Screw connector for street lighting with threaded pin, bright -
Sleeves for compacted conductors, for tubular cable lugs and connector standard type -
Sleeves for sector shaped conductors, 3-core cable, standard type -
Sleeves for sector shaped conductors, 3-core cable, DIN version -
Sleeves for sector shaped conductors, 4-core cable, standard type -
Sleeves for sector shaped conductors, 4-core cable -
Sleeves for sector shaped conductors, 4-core cable, DIN version -
Tubular cable lugs, Cu, solid conductor type -
Butt connectors, Cu, solid conductor type -
T-connectors, Cu, solid conductor type -
Cross-connectors, Cu, solid conductor type -
Tubular cable lugs, Cu, F-series -
Angled tubular cable lugs, Cu, 90° and 45° angled, F-series -
Butt connectors, Cu, F-series -
Screw connectors with 2 screws, with threaded pin, bright finished -
Screw connectors with 2 screws, with threaded pin, tinned -
Screw connector with 2 screws, with shear head, bright finished -
Screw connectors with 2 screws, with shear head, tinned -
Screw connector with barrier, with threaded pin, bright finished -
Screw connector with barrier, with threaded pin, tin plated -
Screw connector with barrier, with shear head, bright finished -
Screw connector with barrier, with shear head, tin plated -
Screw connectors with 4 screws, with threaded pin, bright finished -
Screw connectors with 4 screws, with threaded pin, tin plated -
Screw connector with 4 screws, with shear head, bright finished -
Screw connectors with 4 screws, with shear head, tinned -
Insulated screw connector with threaded pin, bright finished -
Insulated screw connector with barrier, with threaded pin, bright finished -
Insulated screw connector with threaded pin, tin plated -
Insulated screw connector, with shear heads, bright finish -
Insulated screw connector with barrier, with shear head, blank -
Compact tap connectors with shear head, four conductor cables, for main conductor 25-50 mm -
Compact tap connectors with shear head, four conductor cables -
Compact tap connectors, four conductor cables, for main conductor 70 - 185 mm -
Compact tap connectors, three conductor cables -
Bi-metallic washers -
L-BOXX with electromechanical crimping tool EK 50 ML 0.14 - 50 mm² and extensive additional equipment -
LBOXX3R8SET L-BOXX made of plastic with cable lugs 16 - 95 mm² -
LBOXX6R10SET L-BOXX made of plastic with tubular cable lugs 50 - 185 mm² -
L-BOXX 50B made of plastic with standard equipment for electrical installations -
L-BOXX 65B made of plastic with standard equipment for electrical installations -
L-BOXX 65BCB made of plastic with blue connection® - equipment -
L-BOXX 230 B made of plastic with standard equipment for electrical installations -
L-BOXX Mini made of plastic with crimping tool and insulated cable end sleeves 1.5 - 10 mm² -
L-BOXX Mini made of plastic with crimping tool and insulated cable end sleeves 1.5 - 10 mm² -
L-BOXX Mini made of plastic with crimping tool and insulated cable end sleeves 1.5 - 10 mm² -
L-BOXX Mini made of plastic with crimping tool and insulated cable end sleeves 1.5 - 10 mm²
