suitable for
| Crimping force | max. 15 kN |
| Crimping range | 0.14 - 50 mm² |
| Crimping cycle | < 1.5 sec. (based on connection material) |
| Number of crimps | 400 at 10 mm² |
| Battery voltage | 10.8 V |
| Battery capacity | 2.5 Ah, Li-Ion |
| Battery charging time | approx. 45 min. |
| Weight including battery | 0.96 kg |
| Ambient temperature | -10 °C to + 40 °C |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Tubular cable lugs and connectors - Cu, standard design |
|
0,75 - 10 |
|
Crimping dies R 50, indent crimping |
| Tubular cable lugs and connectors - Cu, standard design |
|
6 - 25 |
|
Crimping dies R 50, hexagonal crimp |
| Tubular cable lugs and compression joints for solid conductors - Cu |
|
1,5 - 10 |
|
Crimping dies M 50 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu |
|
6 - 25 |
|
Crimping dies D 50 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu |
|
0,5 - 10 |
|
Crimping dies Q 50 |
| Isolierte Quetschkabelschuhe und Verbinder |
|
10 - 16 |
|
Crimping dies IS 50, simple crimping |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Cable end sleeves |
|
0,5 - 50 |
|
Crimping dies AE 507 |
| Zwillings-Aderendhülsen |
|
2 x 6 - 2 x 16 |
|
Crimping dies ZAE 507 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Insulated cable connections, single crimping |
|
0,5 - 16 |
|
Crimping dies IS 50, simple crimping |
| Insulated cable connections, double crimping |
|
0,5 - 6 |
|
Crimping dies IS 50, double crimping |
| Non-insulated receptacles |
|
0,25 - 6 |
|
Crimping dies CR 50 |
| For stud and shielded sleeves, BNC plugs for coax cable RG 58, 59, 62 and 71 | - | - | Crimping dies BNC 50 | |
| Turned pin receptacle, pin connectors | - | 0,1 - 4 |
|
Crimping dies SB 50 |
| PART NO. | Description |
|---|---|
| EK50ML | Electromechanical crimping tool 0.14 - 50 mm² |
| PART NO. | Description |
|---|---|
| LBOXXEK50ML | L-BOXX with electromechanical crimping tool EK 50 ML 0.14 - 50 mm² and extensive additional equipment |
| EK50ML-L | Electromechanical crimping tool 0.14 - 50 mm² with RAML1 battery, without charger, crimping die, case |
| PART NO. | Description |
|---|---|
| IS5071 | Crimping die for insulated connector 0.5 - 6 mm² |
| KKEK50ML | Hard plastic carrying case |
| LGML1 | Charger for 10.8 V Li-Ion batteries, 230V |
| RAML1225 | Akku 10,8 V / 2,5 Ah, Li-Ion (27 Wh) |
