Now you can enjoy wiring, without the fatigue!

13 April 2022
In specific terms, this means that it should be as light, handy and easy to use as possible.
And, of course, you want to get good at the difficult parts too.
So simply grab yourself a tool from Klauke – we have something for every cross-section:


EK50ML (Micro) for tubular cable lugs from 0.75 to 25 mm² and wire end sleeves from 0.14 to 50 mm²

The Micro works electro-mechanically and delivers the best crimp results with minimal effort with an intuitive PowerSense function and single-lever operation.

EKWF120ML for wire end sleeves from 6 to 120 mm²

This battery-powered hydraulic tool represents ergonomic and safe working.
All wire end sleeves can be crimped without insertion and quickly (thanks to the return stop). Another tool for long-term ease of use.

EK30IDML for tubular cable lugs from 6 to 120 mm²

The EK30IDML works with the proven arbour crimping. All common cable lugs from the R, SG, F and Q series for conductor classes 2, 5 and 6 can be crimped using the tool without having to change an insert even once.

EKM6022 CFB/CFM for tubular cable lugs from 6 to 300 mm² and wire end sleeves from 10 to 240 mm²

With the EKM6022 CFB/CFM, users benefit from the ease of use and the favourable center of gravity.


Find out more