suitable for
| Crimping force | 35 kN |
| Stroke/opening width | 9 mm |
| Crimping range | 6 - 150 mm² |
| Crimping cycle | 3 s to 4 s (depending on crimp cross-section) |
| Number of crimps | approx. 200 at 120 mm² Cu |
| Battery voltage | 10.8 V |
| Battery capacity | 2.5 Ah, Li-Ion |
| Battery charging time | approx. 45 min. |
| Weight including battery | 1.6 kg |
| Ambient temperature | -10 °C to +40 °C |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Tubular cable lugs and connectors, standard type, tubular cable lugs for switch cabinet connections |
|
6 - 150 |
|
Crimping dies HR 4 |
| Insulated cable lugs and compression joints, standard type, insulated pin terminals |
|
10 - 70 |
|
Crimping dies HIS 4 |
| Tubular cable lugs and connectors for fine stranded conductors |
|
10 - 35 |
|
Crimping dies HF 4 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Tubular cable lugs and connectors – VA |
|
1,5 - 2,5 |
|
Crimping dies HN 4, indent crimping |
| Tubular cable lugs and connectors – VA |
|
4 - 16 |
|
Crimping dies HN 4, double indent crimp |
| Tubular cable lugs and connectors - Ni |
|
1,5 - 2,5 |
|
- |
| Tubular cable lugs and connectors - NI |
|
4 - 16 |
|
- |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu |
|
6 - 120 |
|
Crimping dies HD 4 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu |
|
10 - 35 |
|
Crimping dies HQ 4 |
| Insulated solderless terminals and pin terminals |
|
10 - 16 |
|
Crimping dies HISQ 4 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Pre-rounding dies for sector-shaped Al and Cu conductors, 3-core and 4-core sector-shaped conductors |
|
16 sm - 150 se / 120 sm |
|
Crimping dies HRU 4 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Compression cable lugs and connectors according to DIN - Al |
|
10 rm/sm, 95 re/se |
|
Crimping dies HA 4 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile |
|---|---|---|---|
| Compression cable lugs and connectors - Al/Cu |
|
10 rm/sm, 95 re/se |
|
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| C-type terminal clamps |
|
10 - 35 |
|
Crimping dies HC 4 / HMC 4 |
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Cable end sleeves |
|
10 - 50 |
|
Crimping dies HAES 4 |
| PART NO. | Description |
|---|---|
| EK354ML | Battery powered hydraulic crimping tool 6 - 150 mm² |
| PART NO. | Description |
|---|---|
| RAML1225 | Akku 10,8 V / 2,5 Ah, Li-Ion (27 Wh) |
| LGML1 | Charger for 10.8 V Li-Ion batteries, 230V |
| KKML | Hard plastic carrying case |
| PART NO. | Description |
|---|---|
| EK354MLSETHR | EK 35/4-L with crimping die set HR 4 from 6 - 150 mm² |
| EK354MLSETHD | EK 35/4-L with crimping die set HD 4 from 6 - 120 mm² |