Compression joint according to DIN, Al

Compression joint according to DIN, Al

  • Für zugentlastete Verbindungen von Aluminiumleiter nach DIN EN 60228 und Aluminiumseilen nach DIN EN 50182
  • Nach DIN 46267, Teil 2
  • Eindeutige Werkzeugzuordnung durch Kennziffer
  • Optimaler Übergangswiderstand durch Füllung mit Kontaktfett
  • Für rundgedrückte Sektorleiter
Show Less
Read More

Features

  • Leichte Verarbeitung durch Pressmarkierungen
  • Einfache Kabeleinführung durch präzise Endenbearbeitung
  • Einfache und sichere Verarbeitung durch Mitteneindruck

Material

  • E-Aluminium

Surface

  • Blank

Additional information

  • re = rund eindrähtig, rm = rund mehrdrähtig, se = sektorförmig eindrähtig, sm = sektorförmig mehrdrähtig, Sektorleiter müssen rundgedrückt werden
  • * = nicht genormt
  • 16 - 400 mm² IEC geprüft

Compatibility

Cable type
{{model}}
Cable type Description
Single-strand conductor (Class 1 according to DIN EN 60228) made from aluminium or aluminium alloy 
Single-strand compacted sector-shaped conductor 90° (Class 1 according to DIN EN 60228) made from aluminium or aluminium alloy 
Single-strand compacted sector-shaped conductor 120° (Class 1 according to DIN EN 60228) made from aluminium or aluminium alloy 
Multi-strand conductor (Class 2 according to DIN EN 60228) made from aluminium or aluminium alloy 
Multi-strand compacted sector-shaped conductor 90° (Class 2 according to DIN EN 60228) made from aluminium or aluminium alloy 
Multi-strand compacted sector-shaped conductor 120° (Class 2 according to DIN EN 60228) made from aluminium or aluminium alloy 

Ordering Information

Ordering information
{{model}}
PART NO. Nominal cross-section mm² Note Code Dimensions mm Number of crimps Weight/100 pcs. ~kg PU/pcs.
rm/sm re/se d1 d4 l Al (7 mm) Al (wide)
222R 10  16  10  5,0  10  55  3/3  --  0,95  10 
223R 16  25  12  5,8  12  55  3/3  --  1,40  10 
224R 25  35  12  6,8  12  70  4/4  2/2  1,60  10 
225R 35  50  14  8,0  14  85  5/5  2/2  2,60  10 
226R 50  70  16  10  16  85  5/5  2/2  3,20  10 
227R 70  95  18  11,5  18,5  105  6/6  3/3  5,30  10 
228R 95  120  22  13,5  22  105  6/6  3/3  7,60  10 
229R 120  150  22  15  23  105  6/6  3/3  7,80  10 
230R 150  185  25  16,5  25  125  6/6  3/3  10,70  10 
231R 185  240  28  18,5  28,5  125  6/6  3/3  14,30 
232R 240  300  32  21,0  32  145  8/8  3/3  20,30 
233R 300  --  34  23,3  34  145  8/8  3/3  22,20 
234R 400  --  38  26,0  38,5  210  --  5/5  40,80 
235R 500  --  44  29,0  44  210  --  5/5  56,00