| Crimping range | 2.5 / 4 / 6 / 10 mm² |
| Battery voltage | 10.8V |
| Battery capacity | 2.5 Ah, Li-Ion |
| Battery charging time | Approx. 45 mins. |
| Weight including battery | 0.96 kg |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
| PART NO. | Description |
|---|---|
| EK50ML-L | Electromechanical crimping tool 0.14 - 50 mm² with RAML1 battery, without charger, crimping die, case |
| EKPV50ML | Electromechanical crimping tool for PV connector 2.5 - 6 mm² |
| PART NO. | Description |
|---|---|
| KKEK50ML | Hard plastic carrying case |
| LGML1 | Charger for 10.8 V Li-Ion batteries, 230V |
| PV502 | PV series crimping die, 2.5 – 6 mm² |
| PV503 | Crimping insert, PV series, 4 - 10 mm² |
| RAML1225 | Akku 10,8 V / 2,5 Ah, Li-Ion (27 Wh) |
| PART NO. | Description |
|---|---|
| EC50ML | Electromechanical cutting tool |
| EK50ML | Electromechanical crimping tool 0.14 - 50 mm² |
| EK50ML-L | Electromechanical crimping tool 0.14 - 50 mm² with RAML1 battery, without charger, crimping die, case |
| EKSD50ML | Electromechanical Stripping Tool 6 - 35 mm² |
| EKWF50ML | Electromechanical crimping tool 0.5 - 50 mm² for cable end-sleeves and twin cable end-sleeves |
| LBOXXEK50ML | L-BOXX with electromechanical crimping tool EK 50 ML 0.14 - 50 mm² and extensive additional equipment |