suitable for
Additional information
Bosch battery system
| Crimping force | 30 - 60 kN |
| Stroke/opening width | 35.5 mm |
| Crimping range Cu | 10 - 240 mm² |
| Crimping range Al | 50 - 240 mm² |
| Crimping cycle | 2 s (for MRS) to 7 s (depending on crimping cross-section) |
| Battery voltage | 18 V |
| Battery capacity | 2.0 Ah, Li-Ion |
| Battery charging time | 15 min. |
| Weight including battery | 2.6 kg |
| Ambient temperature | -10 °C to 40 °C |
Makita battery system
| Crimping force | 30 - 60 kN |
| Stroke/opening width | 35.5 mm |
| Crimping range Cu | 10 - 240 mm² |
| Crimping range Al | 50 - 240 mm² |
| Crimping cycle | 2 s (for MRS) to 7 s (depending on crimping cross-section) |
| Number of crimps | approx. 100 - 300 |
| Battery voltage | 18 V |
| Battery capacity | 1.5 Ah, Li-Ion |
| Battery charging time | 15 min. |
| Weight including battery | 2.6 kg |
| Ambient temperature | -10 °C to +40 °C |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
| suitable for | Connecting material | Crimping range mm² | Crimping profile |
|---|---|---|---|
| Tubular cable lugs and connectors, standard type, tubular cable lugs for switch cabinet connections |
|
10 - 240 |
|
| Tubular cable lugs and connectors for fine stranded conductors |
|
10 - 240 |
|
| suitable for | Connecting material | Crimping range mm² | Crimping profile |
|---|---|---|---|
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu |
|
10 - 240 |
|
| suitable for | Connecting material | Crimping range mm² | Crimping profile |
|---|---|---|---|
| Compression cable lugs and connectors according to DIN - Al |
|
50 - 240 |
|
| Compression joints for full tension connections of Aldrey-conductors according to DIN EN 50182, Al-conductors DIN EN 50182 |
|
50 - 185 |
|
| Compression joints according to DIN 48085, part 3 for Al-/St-cable according to DIN EN 50182 |
|
50 - 240 |
|
| suitable for | Connecting material | Crimping range mm² | Crimping profile |
|---|---|---|---|
| Compression cable lugs and connectors - Al/Cu |
|
50 - 240 |
|
