K 50 Crimping tool for interchangeable crimping dies
- Parallel guided crimping jaws
- Fast change of crimping die without readjustment due to special fixing system
- Exact positioning of the crimping dies due to die locating pins
Read More
{{ skuDescription }}
{{catalogNumber}}Features
- Optimised force transmission
- With ratchet for consistently controlled crimp results
- Handle with slip guard and inscription panel
Specifications
| Length | 220 mm |
| Weight | 0.6 kg |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
Compatibility
Tubular cable lugs and connectors - Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Tubular cable lugs and connectors - Cu, standard design |
|
0,75 - 10 |
|
Crimping dies R 50, indent crimping |
| Tubular cable lugs and connectors - Cu, standard design |
|
6 - 25 |
|
Crimping dies R 50, hexagonal crimp |
| Tubular cable lugs and compression joints for solid conductors - Cu |
|
1,5 - 10 |
|
Crimping dies M 50 |
Compression cable lugs and connectors to DIN - Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu |
|
6 - 25 |
|
Crimping dies D 50 |
Solderless terminals, connectors and pin terminals to DIN - Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu |
|
0,5 - 10 |
|
Crimping dies Q 50 |
| Insulated solderless terminals and pin terminals |
|
10 - 16 |
|
Crimping dies IS 50, simple crimping |
Cable end-sleeves
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Aderendhülsen |
|
0,5 - 50 |
|
Crimping dies AE 507 |
| Zwillings-Aderendhülsen |
|
2 x 6 - 2 x 16 |
|
Crimping dies ZAE 507 |
Cable connections, insulated and non-insulated
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Insulated cable connections, single crimping |
|
0,5 - 16 |
|
Crimping dies IS 50, simple crimping |
| Insulated cable connections, double crimping |
|
0,1 - 6 |
|
Crimping dies IS 50, double crimping |
| Non-insulated receptacles |
|
0,25 - 6 |
|
Crimping dies CR 50 |
| For stud and shielded sleeves, BNC plugs for coax cable RG 58, 59, 62 and 71 | - | - | Crimping dies BNC 50 | |
| Turned pin receptacle, pin connectors | - | 0,1 - 4 |
|
Crimping dies SB 50 |
Ordering Information
Ordering information
| PART NO. | Description |
|---|---|
| K50 | Crimping tool for replaceable dies 0.1 - 50 mm² |
Accessories
| PART NO. | Description |
|---|---|
| MK55 | Steel carrying case |