Download Klauke Link® App
Klauke Link® – a new mobile platform that provides an interface to Klauke devices equipped with Bluetooth technology. Registration is quick and easy and the app provides valuable real-time data on your smartphone or tablet. Register today and start working faster... and smarter.
Bosch battery system
| Crimping force | 60 kN |
| Stroke | 42 mm |
| Crimping range | 6 - 300 mm² |
| Crimping cycle | 3 s to 5 s (depending on crimping cross-section) |
| Cutting range | max. 40 mm dia. |
| Punching capacity | to 64 mm dia. round; to 92 x 92 mm square |
| Battery voltage | 18 V |
| Battery capacity | 5.0 Ah, Li-Ion |
| Battery charging time | 45 mins |
| Weight | 4.8 kg |
| Ambient temperature | -10 °C to +40 °C |
Makita battery system
| Crimping force | 60 kN |
| Stroke | 42 mm |
| Crimping range | 6 - 300 mm² |
| Crimping cycle | 3 s to 5 s (depending on crimping cross-section) |
| Cutting range | max. 40 mm dia. |
| Punching capacity | to 64 mm dia. round; to 92 x 92 mm square |
| Battery voltage | 18 V |
| Battery capacity | 4.0 Ah, Li-Ion |
| Battery charging time | 36 mins |
| Weight | 4.8 kg |
| Ambient temperature | -10 °C to +40 °C |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
| PART NO. | Description |
|---|---|
| EK60UNVCFM | Battery powered hydraulic universal tool 6 - 300 mm² with Makita battery |
| EK60UNVCFB | Battery powered hydraulic universal tool 6 - 300 mm² with Bosch battery |
| PART NO. | Description |
|---|---|
| RALB2EU | Bosch battery 18 V / 5.0 Ah, Li-Ion |
| RAL40 | 18 V / 4.0 Ah, Li-Ion Makita battery |
| LGLB1EU | Bosch quick-charger for 18 V Li-Ion batteries |
| LGL1 | Makita quick-charger for 18 V Li-Ion batteries |
| UA22 | Adapter for crimping dies of Series 22 |
| KK120UNVNG | Hard plastic carrying case |
| PART NO. | Description |
|---|---|
| UA22 | Adapter for crimping dies of Series 22 |
| UCACSR | Cutting insert for cutting ACSR overhead power lines and steel |
| UC26 | Cutting die up to max. 26 mm dia. for cutting stranded Cu and Al conductors without armouring |
| UC40 | Cutting die to max. 40 mm dia. |
| UCM5 | Cutting die for threaded rods M5 metric |
| UCM6 | Cutting die for threaded rods M6 metric |
| UCM8 | Cutting die for threaded rods M8 metric |
| UCM10 | Cutting die for threaded rods M10 metric |
| UCM12 | Cutting die for threaded rods M12 metric |
| UCUNC14 | Cutting insert for threaded rods 1/4" |
| UCUNC38 | Cutting die for threaded rods 3/8" |
| UCUNC12 | Cutting die for threaded rods 1/2" |
| UCD3515 | Cutting die for profile conductors 35 x 15 |
| UCD3215 | Cutting die for profile conductors 32 x 15 x 9 |
| UCD3575 | Cutting die for profile conductors 35 x 7.5 |
| UCN2980 | Cutting die for profile conductors 2980 |
| UCF | Cutting die for laminated Cu bus bars, max. width 37.5 mm |
| UCAC107 | Cutting die 107 mm² type AC for catenary wires in railway construction |
| UCBC85 | Cutting die 85 mm² type BC for catenary wires in railway construction |
| UCBC110 | Cutting die 110 mm² type BC for catenary wires in railway construction |
| UCBC120 | Cutting insert 120 mm² type BC for catenary wires in railway construction |
| UCBC150 | Cutting die 150 mm² type BC for catenary wires in railway construction |
| UA6P | Hole punch adapter to 64 mm, 92 x 92 mm and 46 x 92 mm dia. |
| UPD6 | Die for punching DIN rails 35x15; 32x15x9; 35x7.5 |
