Select a Country
  • {{country.Text}}
Select a Language

  • Bluetooth remote control


  • Flex-O-Twist™ speed flex leader


  • Steel fish tape 4 mm dia.


  • Draw stud for punch with manual actuation


  • Pulling grip, open


  • Draw stud for shaped punch


  • Nylon fish tape 4 mm dia.


  • Perlon® fish tape 4 mm dia.


  • Polyester fish tape green 4.5 mm dia.


  • Speedy Spinner fibreglass cable pulling system


  • Smart Butler fibreglass cable pulling-in system with steel reel basket


  • K 4 Crimping tool for cable end-sleeves 0.5 - 2.5 mm²


  • Interchangeable bit screwdriver


  • Standard punch systems


  • Compression joint, Al, - barrier version


  • EK 50/5 Battery-powered hydraulic crimping tool 6 - 240 mm²


  • Insulated screw connector with threaded pin, tin plated


  • Insulated screw connector, with shear heads, bright finish


  • LGL3 charger for 18 V Li-Ion batteries (available from plumbing wholesalers)


  • LGML1 charger for 10.8 V Li-Ion batteries, 230V (available from plumbing wholesalers)


  • LS 100 FLEX battery powered hydraulic punching tool


  • LS 50 FLEX battery powered hydraulic punching tool


  • EBS 8 ML / EBS 12 ML Battery powered hydraulic bolt cutter 8 mm dia. / 12 mm dia.


  • Automatic wire stripper, 4 - 16 mm²


  • Automatic wire stripper, 0.1 - 4 mm²


  • EKM 60/22 IS ISM VDE battery powered hydraulic crimping tool 6 - 300 mm²  New!


  • EKM 60 ID ISM VDE battery- powered hydraulic crimping tool 10 - 240 mm²  New!


  • Automatic wire stripper, 0.02 - 10 mm²


  • RAL 1 Makita battery 18 V / 1.5 Ah, Li-Ion (27 Wh) 


  • DIN profile conductor cutting and punching tool


  • SDG 45 Hydraulic cutting head 45 mm dia.


  • Profile conductor cutter Compact


  • ES 20 ML Battery-powered hydraulic cutting tool 20 mm dia.


  • RAL 2 Makita battery 18 V / 3.0 Ah, Li-Ion (54 Wh) 


  • Wire stripper with stepless stripping range 0.03 - 16 mm²


  • RAL 3 Battery 18 V / 3.3 Ah Li-Ion (54 Wh)


  • ES 32 ML / ES 32 F ML Battery-powered hydraulic cutting tools 32 mm dia.


  • SDG 55 Hydraulic cutting head 55 mm dia.


  • SDK 65 Hydraulic cutting head 65 mm dia.


  • Wire stripper, 0.2 - 6 mm²


  • Wire stripper for round and flat cables


  • SDG 85/2 Hydraulic cutting head 85 mm dia.


  • SDK 85 Hydraulic cutting head 85 mm dia.


  • Automatic wire stripper for round cables in the solar technology sector


  • SDG 105 Hydraulic cutting head 105 mm dia.


  • SDK 105 Hydraulic cutting head 105 mm dia.


  • RAML1 battery 10.8 V / 1.5 Ah, Li-Ion (16.2 Wh)


  • SDK 120 Hydraulic cutting head 120 mm dia.


  • ESG 55 Battery powered hydraulic cutting tool 55 mm dia.


  • Compression cable lugs, Al


  • ES 20 ISM VDE battery-powered hydraulic cutting tool 20 mm dia.  New!


  • ES 32 ISM VDE Battery-powered hydraulic cutting tool 32 mm dia.  New!


  • Hydraulic safety cutting units with foot pump


  • SSG hydraulic safety cutting units with foot pump to max. 105 mm dia.


  • EK 120 U Battery powered hydraulic crimping tool 16 - 400 mm²


  • ESSG battery-powered hydraulic safety cutting unit to max. 105 mm dia.


  • ASSG Battery powered hydraulic safety cutters to max. 120 mm dia.


  • EK 120/32 Battery powered hydraulic crimping tool 16 - 400 mm²


  • EK 120/42 Battery powered hydraulic crimping tool 16 - 400 mm²


  • EK 135 FT Battery powered hydraulic crimping tool 10 - 630 mm²


  • ES 105 Battery powered hydraulic cutting tool 105 mm dia.


  • ES 32 F Battery powered hydraulic cutting tool 32 mm dia. for fine and superfine stranded copper cable


  • ES 65 Battery powered hydraulic cutting tool 65 mm dia.


  • ES 85 Battery powered hydraulic cutting tool 85 mm dia.


  • ESG 105 Battery powered hydraulic cutting tool 105 mm dia.


  • ESG 45 Battery powered hydraulic cutting tool 45 mm dia.


  • ESG 85 Battery powered hydraulic cutting tool 85 mm dia.


  • ESM 25 Battery powered hydraulic cutting tool 25 mm dia.  New!


  • ES 25 ISM VDE battery powered hydraulic cutting tool 25 mm dia.  New!


  • ESM 35 Battery powered hydraulic cutting tool 35 mm dia. for copper and aluminium cable  New!


  • ESM 35 ISM VDE battery powered hydraulic cutting tool 35 mm dia. for copper and aluminium cables  New!


  • ESM 50 Battery powered hydraulic cutting tool 50 mm dia. for copper and aluminium cable


  • ESM 50 ISM VDE battery powered hydraulic cutting tool 50 mm dia. for copper and aluminium cables


  • EHP 3 Electro-hydraulic pump 400V, 700 bar


  • EHP 2 Electro-hydraulic pump 400V, 700 bar


  • FHP 2 Foot pump 700 bar


  • K 400 Professional wire stripping tool 4.5 - 40 mm


  • LGL 1 Makita quick-charger for 18 V Li-Ion batteries


  • Keyway punch


  • LGL 3 Makita quick-charger for 18V Li-Ion batteries


  • PHD 2 Pneumatic/hydraulic pressure transmitter, 700 bar


  • Cable knife without blade


  • Hydraulic punch Quick Draw™ 7804E


  • Hydraulic punch Quick Draw 90™ 7904E


  • Cable knife with straight blade


  • LGL B1 EU Bosch charger for 18 V Li-Ion batteries


  • Manual hydraulic punch


  • LGML 1 Charger for 10.8 V Li-Ion batteries, 230V


  • Cable knife with hooked blade


  • EHP 4 Electro-hydraulic pump 700 bar


  • Round cable stripper 8 - 13mm²


  • Multi-stripper


  • AHP 700-L Battery powered hydraulic pump, 700 bar


  • Photovoltaic stripper


  • 767 Hydraulic hand pump


  • Thread grease


  • 1725 Hydraulic foot pump


  • AS 105 FHP / AS 120 FHP Hydraulic cutting tools for foot pump 105 and 120 mm dia.


  • EBS 6 L GKS Battery powered hydraulic cable tray cutter 6 mm dia.


  • Cutting die


  • EBS 8 Battery powered hydraulic bolt cutter 8 mm dia.


  • EBS 12 Battery powered hydraulic bolt cutter 12 mm dia.


  • TW 150 Transport trolley for electro-hydraulic pump EHP 4


  • ES 20 Battery-powered hydraulic cutting tool 20 mm dia.


  • ES 20 RMC Battery-powered hydraulic cutting tool 20 mm dia.


  • ESG 25 Battery-powered hydraulic cutting tool 25 mm dia.


  • TG 3 Carrying strap with shoulder padding


  • FTA 3 / ZST 4 Two-hand safety controls for pumps


  • ES 32 Battery-powered hydraulic cutting tool 32 mm dia.


  • FTA 1 / FTA 4 Foot switches for pumps


  • ES 32 RMC Battery-powered hydraulic cutting tool 32 mm dia.


  • ESGM 45 Battery-powered hydraulic cutting tool 45 mm dia.


  • Hydraulic Oil


  • HS 2 Hydraulic hoses


  • HS OEL hydraulic hoses, oil filled


  • Hydraulic hose 6.4 mm dia. x 3 m


  • Hydraulic hose 6.4 mm dia. x 0.9 m


  • KST 2 Coupler


  • KMF 1 Coupler for crimping and cutting heads


  • DNP 2 Barrel nipple


  • HTA 4 remote control for hydraulic pump


  • EK 60 UNV Battery-powered hydraulic universal tool 6 - 300 mm²


  • EK 60 UNV Battery-powered hydraulic universal tool 6 - 300 mm²


  • EK 120 UNV Battery-powered hydraulic universal tool 10 - 400 mm²


  • i-press® software and i-press® app


  • RAL 40 Makita battery 18 V / 4.0 Ah, Li-Ion (72 Wh) 


  • RAL 4 Makita battery 18 V / 5.0 Ah, Li-Ion


  • RAL B1 EU Bosch battery 18 V / 2.0 Ah, Li-Ion


  • RAL B2 EU Bosch battery 18 V / 5.0 Ah, Li-Ion


  • NG2 mains adapter 18 V for 120 V or 230 V mains voltage


  • Dura Spinner polyester fish tape system  New!


  • Flexi Spinner polyester cable pulling system


  • Fibreglass cable puller rods


  • HSS Bi-metal hole saws


  • HSS bi-metal hole saw set


  • Electro set with countersink


  • Arbor for HSS bi-metal hole saws 14 - 30 mm


  • Arbor for HSS bi-metal hole saws 32 - 152 mm


  • SDS arbor for HSS bi-metal hole saws


  • Replaceable pilot drill for arbor HSS bi-metal hole saws


  • Draw stud for punch with hydraulic actuation


  • Water pump pliers, jaw width 50 mm


  • Water pump pliers


  • Water pump pliers, jaw width 53 mm


  • VDE cable cutter


  • VDE Power combination pliers


  • VDE Power combination pliers, angled


  • VDE Side cutter


  • VDE Electrician's side cutter


  • VDE Power side cutter


  • VDE Lever power side cutter


  • VDE Telephone pliers, straight


  • VDE Telephone pliers, curved


  • VDE Wire stripper


  • VDE Water pump pliers, jaw width 50 mm


  • Automatic VDE wire stripper 0.2 - 6 mm²


  • Crimping dies L 50


  • Crimping dies R 50, indent crimping


  • Crimping dies R 50, hexagonal crimp  New!


  • Crimping dies M 50


  • Crimping dies D 50  New!


  • Crimping dies Q 50


  • Crimping dies AE 50


  • Crimping dies IS 50, simple crimping


  • Crimping dies IS 50, double crimping


  • Crimping dies CR 50


  • Crimping dies BNC 50


  • Crimping dies SB 50


  • Crimping tools for tubular cable lugs and connectors, L-series


  • K 46 Crimping tool for cable end-sleeves 1.5 - 6 mm²


  • K 3 Crimping tool for cable end-sleeves 0.5 - 16 mm²


  • K 35 Crimping tool for cable end-sleeves 10 - 35 mm²


  • K 1 Crimping tool for cable end-sleeves 0.14 - 2.5 mm²


  • K 48 Crimping tool for cable end-sleeves 0.14 - 2.5 mm²


  • K 36 Crimping tool for cable end-sleeves and twin cable end-sleeves 0.5 - 6 mm²


  • K 32 TWIST-it Crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm²  New!


  • K 34 Crimping tool for cable end-sleeves and twin cable end-sleeves 6 - 16 mm²


  • K 37 Crimping tool for cable end-sleeves 0.14 - 6 mm²


  • K 39 Crimping tool for cable end-sleeves 10 - 25 mm²


  • K 38/2 Crimping tool for cable end-sleeves and twin cable end-sleeves 0.5 - 6 mm²


  • K 30/3 Crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 10 mm²


  • K 30/4 K self-adjusting crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 16 mm²


  • K 30/6 K self-adjusting crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 16 mm²


  • K 301/4 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm²


  • K 301/6 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm²  New!


  • K 27/1 Crimping tool for cable end-sleeves and twin cable end-sleeves 2 x 4 - 50 mm²


  • K 27/2 Crimping tool for cable end-sleeves 50 - 95 mm²


  • K 28 Crimping tool for cable end-sleeves and twin cable end-sleeves 2 x 4 - 50 mm²


  • K 29 Crimping tool for cable end-sleeves 50 - 95 mm²


  • K 80 Crimping tool for insulated cable connections 0.1 - 1 mm²


  • K 82 Crimping tool for insulated cable connections 0.5 - 6 mm²


  • K 82 T Crimping tool for insulated cable connections 0.5 - 6 mm²


  • K 16 Crimping tool for insulated solderless terminals 10 + 16 mm²


  • K 57/2 Crimping tool for non-insulated tabs and receptacles 2.8 mm; 0.1 - 1 mm²


  • K 58/2 Crimping tool for non-insulated tabs and receptacles 4.8 mm; 0.5 - 2.5 mm²


  • K 59/2 Crimping tool for non-insulated tabs and receptacles 6.3 mm; 0.5 - 6 mm²


  • K 65 Crimping tool for non-insulated tabs and receptacles 4.8 mm; 0.5 - 2.5 mm²


  • K 93 Crimping tool for connectors for solid conductors 1.5 - 4 mm²


  • K 94 Crimping tool for tubular cable lugs and connectors for solid conductors 6 - 10 mm²


  • K 2 Crimping tool for tubular cable lugs and connectors, standard type 0.75 - 16 mm²


  • K 02 Crimping tool for tubular cable lugs and connectors for solid conductors 0.75 - 16 mm²


  • K 25 Crimping tool 0.5 - 16 mm²


  • K 95 Crimping tool 16 - 95 mm²


  • TK 95 Crimping tool for workbench assembly 16 - 95 mm²


  • K 5 / K 5 SP Crimping tools 6 - 50 mm²


  • K 6 / K 6 SP Crimping tools 50 - 120 mm²


  • K 07 / K 07 SP Crimping tools 185 - 400 mm²


  • K 7 / K 7 SP Crimping tools 120 - 240 mm²


  • K 8 / K 8 SP Crimping tools 35 - 95 mm²


  • K 04 Crimping tool for tubular cable lugs and connectors, standard type 10-25 mm²


  • K 06 D Syncro crimping tool for DIN compression cable lugs and connectors 6 - 120 mm²  New!


  • K 511 / K 512 Crimping tools for gas-tight connections


  • DN-K 74/2 Crimping tool for BNC connectors and coax cable


  • K 118 Hand-operated cutting tool for Al and Cu cables to 12 mm dia.


  • K 100 Hand-operated cutting tool for Al and Cu cables to 14 mm dia.


  • K 102 Hand-operated cutting tool to 25 mm dia.


  • K 106/1 Hand-operated cutting tool for Al and Cu cables, class 2 to 34 mm dia.  New!


  • K 106/2 Hand-operated cutting tool for Al and Cu cables, class 2 to 62 mm dia.  New!


  • K 103/1 Hand-operated cutting tool for Al and Cu cables to 60 mm dia.


  • K 104/1 Hand-operated cutting tool for Al and Cu cables to 100 mm dia.


  • K 130 Hand-operated cutting tool for Al and Cu cables to 30 mm dia.


  • K 230 Hand-operated cutting tool for Al and Cu cables to 30 mm dia.


  • K 150 Hand-operated cutting tool for Al and Cu cables to 50 mm dia.


  • K 250 Hand-operated cutting tool for Al and Cu cables to 50 mm dia.


  • K 101/1 Hand-operated cutting tool for Al and Cu cables to 26 mm dia.


  • K 105/1 Hand-operated cutting tool for Al and Cu cables to 26 mm dia. with telescopic handles


  • K 201/1 Hand-operated cutting tool for Al and Cu cables to 26 mm dia., length 570 mm


  • K 101/2 Hand-operated cutting tool for Al and Cu cables to 38 mm dia.


  • Insulated crimped cable lugs  New!


  • Insulated solderless terminals, fork type


  • Insulated pin terminals


  • Insulated pin receptacles


  • Insulated pin receptacles


  • Insulated pin receptacles, fully insulated


  • Insulated pin receptacles, fully insulated


  • Insulated receptacles, tinned brass


  • Insulated receptacles, tin plated bronze


  • Insulated receptacles, multiple type


  • Insulated receptacles, fully insulated


  • Insulated tabs


  • Insulated end splices


  • Insulated butt connectors


  • Insulated butt connectors with heat shrink insulation


  • Insulated parallel connectors


  • Cable end-sleeves acc. to DIN, Cu


  • Punched cable lugs, Cu


  • Compression cable lugs according to DIN, Al


  • Solderless terminals according to DIN, Cu


  • Compression cable lugs according to DIN, Cu


  • Tubular cable lugs, stainless steel


  • Butt connectors, stainless steel


  • Tubular cable lugs, Cu L-series


  • Tubular cable lugs, Cu, standard type


  • Tubular cable lugs, Cu, fork type


  • Tubular cable lugs for switch cabinet connections, standard type


  • PK 18 Hydraulic crimping head 6 - 240 mm²


  • THK 18 Hydraulic crimping tool for work bench mounting 6 - 240 mm²


  • PK 22 Hydraulic crimping heads 6 - 300 mm²


  • THK 22 Hydraulic crimping tool for workbench mounting 6 - 300 mm²


  • PK 60 VP Hydraulic crimping head 10 - 240 mm²


  • PK 60 VP/FT Hydraulic crimping head 16 - 300 mm²


  • PK 60 ID Hydraulic crimping head 10 - 240 mm²


  • PK 120/42 Hydraulic crimping head 10 - 400 mm²


  • THK 120 Hydraulic crimping tool for work bench mounting 10 - 400 mm²


  • PK 120 U Hydraulic crimping head 10 - 400 mm²


  • PK 25/2 Hydraulic crimping head 16 - 625 mm²


  • PK 45 hydraulic crimping head 120 - 1,000 mm²


  • PK 1000 Hydraulic 100 t crimping heads up to 1000 mm²


  • EK 15/50 ML Battery-powered hydraulic crimping tool 0.14 - 50 mm²


  • EK 35/4 ML Battery powered hydraulic crimping tool 6 - 150 mm²


  • Easy Roller Cable drum unwinder


  • Cable drum unwinder Easy Roller Plus  New!


  • MagnumPRO™ oil-hardened steel fish tape


  • MagnumPRO™ stainless steel fish tape


  • MagnumPRO™ nylon fish tape


  • MagnumPRO™ fish tape


  • MagnumPRO™ fibreglass fish tape


  • Steel fish tape EZ Reach


  • Polyester Butler cable pulling system with steel reel basket


  • SLUG BUSTER® punch systems


  • Slug Buster® slug splitting set for all applications from ISO 16 - 40


  • Slug Buster® slug splitting set for all applications from PG 9 to PG 21 and 30.5 mm


  • Slug Buster® slug splitting set for ISO 16 - 63


  • Slug Buster® slug splitting set for all applications from PG 9 - 48 and 30.5 mm


  • ESD Electronic side cutter


  • ESD Electronic long-nose pliers


  • Electronic side cutter


  • Electronic assortment, 7 pcs


  • VDE Slotted screwdriver


  • VDE Slotted screwdriver, Slim Line


  • VDE Phillips screwdriver


  • VDE Phillips screwdriver, Slim Line


  • VDE Pozidriv screwdriver


  • VDE Pozidriv screwdriver, Slim Line


  • VDE Plus/Minus Pozidriv screwdriver


  • VDE Plus/Minus Pozidriv screwdriver Slim Line


  • VDE TORX® screwdriver


  • VDE TORX® screwdriver, Slim Line


  • VDE-M-TEC Screwdriver for hexagonal nuts


  • Phase tester with heavy duty handle, one-pin, VDE 0680 150V - 250V


  • Crimping dies HL 4


  • Crimping dies HR 4


  • Crimping die set, 6-150 mm² HR 4 in plastic case, 11 pcs


  • Crimping dies HIS 4


  • Crimping dies, blue connection® HB 4


  • Crimping die set 6-150 mm², blue connection® HB 4 in plastic case, 11 pcs


  • Crimping dies HF 4


  • Crimping dies HM 4


  • Crimping dies HN 4, indent crimping


  • Crimping dies HN 4, double indent crimp


  • Crimping dies HD 4


  • Crimping die set, 6-120 mm² HD 4 in plastic case, 10 pcs


  • Crimping dies HQ 4


  • Crimping dies HISQ 4


  • Crimping dies HRU 4


  • Crimping dies HA 4


  • Crimping dies HC 4 / HMC 4


  • Crimping dies HAES 4  New!


  • Crimping dies HZAE 4


  • Crimping dies HZAES 4


  • EK 50 ML Electromechanical crimping tool 0.14 - 50 mm²


  • EK 50/5 Battery powered hydraulic crimping tool 6 - 240 mm² with Makita battery


  • ST 23 B Pocket box with cable end-sleeves 0.25-1 mm²


  • ST 21 B Pocket box with cable end-sleeves 0.5-2.5 mm²


  • ST 22 B Pocket box with cable end-sleeves 4-16 mm²


  • EK 35/4 Battery-powered hydraulic crimping tool 6 - 150 mm²


  • EK 50/5 Battery-powered hydraulic crimping tool 6 - 240 mm²


  • EK 50/18 Battery-powered hydraulic crimping tool 6 - 240 mm²


  • EKM 60/22 Battery-powered hydraulic crimping tool 6 - 300 mm²


  • EK 60/22 Battery-powered hydraulic crimping tool 6 - 300 mm²


  • EK 60 VP Battery-powered hydraulic crimping tool 10 - 240 mm²


  • EK 60 VP/FT Batter-powered hydraulic crimping tool 16 - 300 mm²


  • EKM 60 ID Battery powered hydraulic crimping tool 10 - 240 mm²


  • EK 120 ID Battery-powered hydraulic crimping tool 35 - 500 mm²


  • K 507 Crimping tool with interchangeable crimping dies


  • K 50 Crimping tool for interchangeable crimping dies


  • K 35/4 Crimping tool for replaceable dies 6 - 150 mm²


  • K 18 Crimping tool for interchangeable dies according to DIN 48083, Part 1, 6 - 240 mm²


  • K 22 Crimping tool for replaceable dies 6 - 300 mm²


  • Non-insulated receptacles


  • Non-insulated receptacles with branch


  • Non-insulated receptacles with locking latch


  • Non-insulated receptacles with lateral conductor connector


  • Non-insulated tabs


  • Non-insulated tabs, angled version


  • Non-insulated tabs, straight version


  • Non-insulated tabs for soldering


  • Non-insulated plug distributor


  • Insulated cable end-sleeve according to DIN with Easy-Entry


  • Insulated cable end-sleeves to DIN with Easy-Entry, colour code 1


  • Insulated cable end-sleeves to DIN with Easy-Entry, colour code 2


  • Insulated cable end-sleeves with lug


  • Designation rings, numbers


  • Designation ring numbers 0-9


  • Designation rings letters A - Z


  • A 300 Insert fork for designation ring


  • Tubular soldering sleeves, CuZn  New!


  • Compression cable lugs, Al/Cu


  • Compression cable lugs, Al/Cu with Cu eye


  • Compression joint according to DIN, Al


  • Compression joint, Al, standard type


  • Insulated solderless terminals, Cu with Easy-Entry


  • Insulated pin terminals, Cu with Easy-Entry


  • Angled compression cable lugs, Cu, 90° angled


  • Angled compression cable lugs, Cu, 45° offset


  • Tubular cable lugs, Ni


  • Tubular cable lugs, Ni, fork type


  • Butt connectors, Ni


  • Angled tubular cable lugs, Cu, 90° angled, standard type


  • Angled tubular cable lugs, Cu, 45° offset, standard type


  • Pulling grips Junior, closed


  • Pulling grips type T, closed


  • Pulling grip set, closed


  • Rope for cable puller 6800-22 CE


  • SLUG SPLITTER® punch system (stainless steel)


  • Speed Punch™ punch system


  • VDE Pliers set, 3 pcs


  • VDE Pliers set, 4 pcs


  • VDE Pliers/screwdriver set, 6 pcs


  • VDE Screwdriver set, 3 pcs


  • VDE Screwdriver set, 3 pcs


  • VDE Screwdriver set, 3 pcs


  • VDE Screwdriver set, 6 pcs


  • VDE Screwdriver set, Slim Line, 5 pcs


  • VDE Screwdriver set, Slim Line, 6 pcs, case


  • VDE interchangeable blades, 1/4" drive


  • Crimping dies HL 5


  • Crimping dies HR 5


  • Crimping die set, 6-240 mm², HR 5 in plastic case, 9 pcs


  • Crimping dies HIS 5


  • Crimping dies, blue connection® HB 5


  • Crimping die set 6 - 185 mm², blue connection® HB 5 in plastic case, 8 pcs


  • Crimping dies HF 5


  • Crimping dies HD 5


  • Crimping die set, 6 - 185 mm² HD 5 in plastic case, 8 pcs


  • Crimping dies HQ 5


  • Crimping dies HRU 5


  • Crimping dies HA 5


  • Crimping dies HAD 5


  • Crimping dies HC 5


  • Crimping dies HAES 5  New!


  • Crimping dies HZAE 5


  • Crimping dies HZAES 5


  • HSG 45 Hand-operated hydraulic cutting tool 45 mm dia.


  • HSG 55 Hydraulic cutting tools, hand operated 55 mm dia.


  • HSG 85/2 Hand-operated hydraulic cutting tool 85 mm dia.


  • ST 15 B Pocket box with insulated twin cable end-sleeves 2 x 0.75 - 2 x 2.5 mm²


  • ST 1 B pocket box with insulated cable end-sleeves 0.5-2.5 mm², DIN 46228 Part 4, colour code 1


  • ST 11 B pocket box with insulated cable end-sleeves 0.5-2.5 mm², DIN 46228 Part 4


  • ST 31 B pocket box with insulated Cable end-sleeves 0.5-2.5 mm², DIN 46228 Part 4, colour code 2


  • ST 12 B pocket box with insulated Cable end-sleeves 4-16 mm², DIN 46228 Part 4


  • ST 2 B pocket box with insulated Cable end-sleeves 4-16 mm², DIN 46228 Part 4, colour code 1


  • ST 32 B pocket box with insulated Cable end-sleeves 4-16 mm², DIN 46228 Part 4, colour code 2


  • ST 3 B pocket box with insulated Cable end-sleeves 0.25-1 mm², DIN 46228 Part 4, colour code 1


  • ST 13 B pocket box with insulated cable end-sleeves 0.25-1 mm², DIN 46228 Part 4 and similar, colour code 1


  • ST 33 B pocket box with insulated Cable end-sleeves 0.25-1 mm², DIN 46228 Part 4 and similar, colour code 2


  • HK 60/18 Hand-operated hydraulic crimping tool 6 - 240 mm²


  • GR 4698 DO Pocket box with insulated cable end-sleeves 0.5 mm²


  • GR 4708 DO Pocket box with insulated cable end-sleeves 0.75 mm²


  • GR 4718 DO Pocket box with insulated cable end-sleeves 1 mm²


  • GR 4728 DO Pocket box with insulated cable end-sleeves 1.5 mm²


  • GR 4738 DO Pocket box with insulated cable end-sleeves 2.5 mm²


  • ST 5 L assortment of empty pocket boxes


  • HK 60/22 Hand-operated hydraulic crimping tool 6 - 300 mm²


  • HK 60 VP Hand-operated hydraulic crimping tool 10 - 240 mm²


  • HK 60 VP/FT Hand-operated hydraulic crimping tool 16 - 300 mm²


  • HK 120/30 Hand-operated hydraulic crimping tool 16 - 400 mm²


  • HK 120/42 Hand-operated hydraulic crimping tool 16 - 400 mm²


  • HK 120 U Hand-operated hydraulic crimping tool 16 - 400 mm²


  • Insulation sleeves


  • Flexible connector, plug width 2.8 mm


  • Flexible connector, plug width 6.3 mm


  • Flexible connector, plug width 4.8 mm


  • Polyamide connector, plug width 2.8 and 6.3 mm


  • Flexible circuit distributor, tab width 2.8 mm


  • Flexible circuit distributor, plug connector width 6.3 mm


  • Insulated cable end-sleeves for short circuit protected conductors  New!


  • Compression joints, Al/Cu


  • Compression joint with Cu bolts, Al


  • Reducing compression joints, Al, barrier type


  • Reduction-compression joints, Al  New!


  • Pin terminals according to DIN, Cu


  • Solderless terminals, Cu, fork type


  • Compression cable lugs DIN special type, Cu with 2 slots


  • Compression cable lugs, special type, Cu with 1 slot, double crimping


  • Compression cable lugs, special type, Cu with 2 slots, double crimping


  • Butt connectors, Cu, L-series


  • Butt connectors, Cu, standard type


  • Parallel connectors, Cu, standard type


  • T-connectors, Cu, standard type


  • Cross-connectors, Cu, standard type


  • Speed Punch™ slug splitting set ISO 16 – 40


  • Speed Punch™ Slug splitting set ISO 16 – 63


  • SLUG SPLITTER® slug splitting set (stainless steel) ISO 16 - 40


  • SLUG-SPLITTER® slug splitting set (stainless steel) ISO 16 - 63


  • Slug Buster® hand hydraulic punch driver set PG 9 - PG 21, 30.5 mm


  • Slug Buster® hand hydraulic punch driver set 90° PG 9 - PG 21, 30.5 mm


  • Slug Buster® hand hydraulic punch driver set ISO 16 - 40


  • Slug Buster® hand hydraulic 90° punch driver set ISO 16 - 40


  • Hand hydraulic punching set 90° ISO 16 - 40


  • Slug Buster® slug splitting set ISO 16 – 40


  • Slug Buster® slug splitting set ISO 16 - 63


  • Slug Buster® slug splitting set PG 9 - 21, 30.5 mm


  • Slug Buster® punch set PG 9 - PG 48, 30.5 mm


  • Kwik Stepper™ step bit


  • Kwik Stepper™ step bit with ROTASTOP® shaft


  • Kwik Stepper™ step bit set


  • Combi bit set M3 - M10


  • Rectangular punch


  • Square punch


  • Special square punch with flattened corners


  • Round punch with four anti-rotation tabs


  • "D" shaped punch


  • Double "D" shaped punch


  • Keyway punch


  • Profile cylinder punch


  • Sub-Min "D" punch


  • Special shape punch for heavy duty connectors with 4 centre mark points


  • Slotted screwdriver bit 1/4", 73 mm


  • Phillips screwdriver bit 1/4", 73 mm


  • Pozidriv screwdriver bit 1/4", 73 mm


  • Plus/Minus Pozidriv screwdriver bit, 1/4", 73 mm


  • TORX® screwdriver bit, 1/4", 73 mm


  • Magnetic holder for screwdriver bit, 1/4", 58 mm


  • Bit holder with quick-change chuck E6.3 1/4"


  • Adapter, 1/4", 50 mm


  • Adapter, 3/8", 50 mm


  • Crimping dies D


  • Crimping dies R


  • Crimping dies R


  • Crimping dies IS


  • Crimping dies F


  • Crimping dies M


  • Crimping dies D


  • Crimping dies Q


  • Crimping dies ISQ


  • Crimping dies RU


  • Crimping dies A


  • Crimping dies AD


  • Crimping dies C / MC


  • Crimping dies AES  New!


  • Crimping dies ZAE


  • Crimping dies ZAES


  • SK 30 B Steel assortment box with cable end-sleeves and crimping tool


  • SK 32 B Steel assortment box with cable end-sleeves and crimping tool


  • Insulated twin cable end-sleeves


  • C-type branch clamps, Cu


  • C-type branch clamps, Cu, multi-purpose clamps


  • Branch clamps in H-type, Cu


  • Contact grease compound for branch clamps


  • Compression joint according to DIN, Al, full tension


  • Insulated solderless terminals for meter connections, Cu, fork type


  • Reducing sleeves, Cu


  • Compression joints according to DIN, Cu


  • Compression joint, Cu


  • Compression joint for cable connections 10-30 kV, Cu, standard type


  • Compression joint for cable connections 10-30 kV, Cu - longitudinal type


  • Compression joints according to DIN, Cu


  • Insulated tubular cable lugs, Cu, standard type


  • Insulated butt connectors, Cu, standard type


  • Tubular cable lugs, blue connection®, Cu


  • Butt connectors, blue connection®, Cu


  • TPI-1 Temperature probe for temperatures of -40 °C to +800 °C


  • TPFSC Temperature probe for temperatures of -40 °C to +500 °C


  • Coax stripper


  • DN-AW3 wire stripping tool, 2.5 - 11 mm


  • Socket spanner bit set 1/4", 29 pcs  New!


  • Allen key set, 7 pcs


  • Ball-point Allen key set, 9 pcs


  • Torque screwdriver set, 0.6 - 1.5 Nm


  • Torque screwdriver set, 1.5 - 3.0 Nm


  • Torque screwdriver set, 3.0 - 5.4 Nm


  • Bit set, 6 pcs, 1/4", 73 mm


  • Bit box Swift, 7 pcs, 1/4", 25 mm


  • Combination spanner set, 12 pcs


  • Crimping dies L 22


  • Crimping dies R 22


  • Tool chest, empty


  • Crimping die set, 6-300 mm² R 22 in plastic case, 14 pcs


  • Crimping dies IS 22


  • Crimping dies, blue connection® B 22


  • Crimping die set 6-300 mm², blue connection® B22 in plastic case, 14 pcs


  • Crimping dies F 22


  • Crimping dies M 22


  • Crimping dies N 22


  • Crimping dies D 22


  • Crimping die set, 6-300 mm² D 22 in plastic case, 14 pcs


  • Crimping dies DP 22


  • Crimping dies Q 22


  • Crimping dies ISQ 22


  • Crimping dies RU 22


  • Crimping dies A 22


  • Crimping die set, 10-300 mm² A 22 in plastic case, 11 pcs


  • Crimping dies AD 22


  • Crimping dies AST 22


  • Crimping dies ST 22


  • Crimping dies C 22 / MC 22


  • Crimping dies H 22


  • Crimping dies AES 22


  • Crimping dies ZAE 22


  • Crimping dies ZAES 22


  • SK 45 B Steel assortment box with insulated cable end sleeves and crimping tool


  • SK 47 B Steel assortment box with insulated cable end sleeves and crimping tool


  • SK 30/3 P Plastic assortment box plastic with insulated cable end sleeves and tools


  • SK 30/3 S Plastic assortment box with insulated cable end sleeves and crimping tool


  • SK 43 NB Steel assortment box with insulated cable end sleeves and tools


  • SK 65 B Steel assortment box with tubular cable lugs and crimping tool


  • SK 50 B Steel assortment box with DIN compression cable lugs and crimping tool


  • Insulated cable end-sleeves, strip form


  • Insulated cable end-sleeves, small coil


  • Insulated cable end-sleeves, large coil


  • HK 25/2 Hydraulic crimping tool with foot pump 16 - 625 mm²


  • HK 45 hydraulic crimping tool with foot pump 120 - 1,000 mm²


  • HK 12/2 EL/380 Hydraulic crimping tool with pump, 16-400 mm², 400 V


  • HK 25/2 EL/380 Hydraulic crimping tool with pump, 16-625 mm², 400 V


  • Compression joint according to DIN, Al/St


  • Solderless connectors according to DIN, short type


  • Solderless connectors according to DIN, Cu, long type


  • Cable Cream™ cable puller lubricant


  • Cable installation lubricant


  • Lubricant spray


  • Control cabinet spirit level, 200 mm


  • Alu spirit level


  • Wooden folding rule, 2 m


  • Measuring tape, 3 m


  • Carpenter's pencil


  • Marking pen


  • Crimping dies HL 13


  • Crimping dies HR 13


  • Crimping dies HR 13


  • Crimping dies HIS 13


  • Crimping dies HF 13


  • Crimping dies HN 13


  • Crimping dies HN 13


  • Crimping dies HN 13, indent crimp


  • Crimping dies HN 13, indent crimp


  • Crimping dies HD 13


  • Crimping dies HDP 13


  • Crimping dies HQ 13


  • Crimping dies HISQ 13