RoHS (Restriction of the use of certain Hazardous Substances) is a European guideline which must be transferred in national laws in all EU member states. It aims to ban the use of hazardous substances in electro and electronic units. By this it serves as a contribution to public health and to the proper re-materialisation and disposal of electro and electronic devices. In particular the following substances must be banned in electro and electronic since July 1st, 2006: Lead, Mercury, Cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
The WEEE (Waste Electrical and Electronic Equipment) is an EU Directive that has passed into national legislation. The directive seeks primarily to avoid waste electrical and electronic equipment. It also promotes the reuse, recycling and other forms of utilising such equipment in order to reduce the amount of waste for disposal. It also seeks to improve the environmental performance of all operators involved in the life cycle of electrical and electronic equipment, e.g. manufacturers, distributors, consumers and in particular those who handle used electrical and electronic equipment directly. The WEEE describes the equipment categories and types affected by the restrictions of the RoHS.
*RoHS does not apply for such equipment categories
For all products in the following areas:
For all products in the following areas:
The Electrical Equipment Act is the national implementation of the WEEE & RoHS Directive. The Electrical Equipment Act also concerns further specific regulations for Germany as a region. The ElektroG came into effect in March 2005. The collection of WEEE products started on 24 March 2006 in Germany.
All products which are already RoHS compliant will be marked with this decal.
All components (e.g. PCB’s) which are lead free and can be used in lead free solder processes are marked with this symbol either on the product or on the packaging.
All products subjected to WEEE will be marked with the wheelie bin (WEEE annex IV resp. EN 50419). This is to show that this product should be recycled and not disposed of as general waste. Klauke tools have a date code consisting of 2 letters which can be found either on the hydraulic cylinder or on the minis underneath the battery. The key to the code can be found here: Date Code (pdf). Greenlee have use a wheelie bin with a bar underneath which implies that this unit was sold after August 13, 2005.
Yes. This item was manufactured before the 13th August 2005 and it was made available for purchase before this date.
Our legal responsibility is currently limited to Germany and France. If you are a distributor buying directly from us, with the intention of reselling these products, and you are based outside of these countries, then, as per the WEEE directive, it is your legal obligation, as an importer, to register in your own European state. This is also true in France if you are not buying from Klauke-France.
The Klauke and Greenlee products fall within 3 of the 10 categories set in the WEEE directive; Category 3, Telecom & IT equipment; Category 6, Electrical & Electronic tools; Category 9, Monitoring and control instruments. Cat 3 and 6 products will comply before July 2006. Cat 9 products are exempt from the scope of the directive at present.
As long as these products were placed on the EU market before the July 2006 deadline, you can keep on selling them after
Klauke headquarters Remscheid
Gustav Klauke GmbH
Auf dem Knapp 46
Fax: +49(0)2191-907-201 (Domestic Sales)
+49(0)2191-907-205 (International Sales)
+49(0)2191-907-251 (Sales Plumbing)
Mail: firstname.lastname@example.org (Link Setzen)
16, Rue Saint-Louis
E-Mail: email@example.com (Link Setzen)
Greenlee Textron Headquarter
Greenlee Textron Inc.
4455 Boeing Drive
Rockford, Illinois 61109-2988
Mail: firstname.lastname@example.org (Link Setzen)
Greenlee Textron Vista Office
1390 Aspen Way
Vista, CA 92081
Greenlee Textron Europe Limited
Suite 8 Brecon House
William Brown Close
Llantarnam Industrial Park Cwmbran
South Wales NP443AB
Phone: 800-642-2155 or 760-598-8900
E-Mail: email@example.com (Link Setzen)
Environmental and resource management at all company levels is of paramount importance to the Klauke Group. We perceive this as an opportunity to become even more innovative and better. We carry this responsibility - for our customers, our employees and our children.
Since 2003, we have participated in the "Ökoprofit" [Ecoprofit] project of the 3-city region in North Rhine Westphalia, the aim of which is to preserve energy and resources while making cost savings. Today, we are certified to DIN EN ISO 14001:2004. This internationally valid standard defines globally recognised standards for environmental management systems. It focuses primarily on a continuous improvement process.
Therefore we have established clearly defined goals:
with the aim to sustain of sustaining raw materials, fossil fuels and the environment for future generations.
You can find the certification on our download site.(Link Setzen)
Klauke is an environmentally-conscious and responsible company. That's why we live and act accordingly to the principles which reflect this. We also expect our service providers and suppliers to observe all the relevant health and safety and environmental regulations. In doing so, we are guided by Klauke Principles.
Moreover, we require our suppliers to prove that the raw materials they deliver/process do not come from regions where they are mined by child labour, under generally unacceptable conditions, and where the profits might be used to finance armed conflicts. You can furnish this proof by filling out the Conflict Mineral Questionnaire and returning it to us.
Of course, resource management is also very important to us. We take all the necessary steps to ensure that only top class materials and components are procured. That is why we only work with certified suppliers. In combination with our strict quality management system, we can thereby safeguard our procurement, product and service standards over the long-term.
We also invest regularly in new systems and optimise processes to save energy and relieve the burden on the environment. Saving measures already implemented include:
Through these measures, we have lowered energy consumption by an average of 30 % since 2009.
Ecologically sound products are essential to our understanding of sustainable development. Starting with the supplier chain, we make sure that all components and materials respect environmental limit values and that we observe the directives.
In the sense of the REACh-Regulation No. 1907/2006 (Registration, Evaluation and Authorisation of Chemicals) the Klauke group is considered a downstream user without registration requirements. As per EU-Regulation No. 1907/2006 paragraph 33 suppliers of products have to fulfil certain information requirements about substances along the supply chain.
In a so called candidate list according to paragraph 59 sec. 1 there have been published substances of very high concern (SVHC).
We would like to ask you, our suppliers to check whether the products sold to Klauke group contain any of the substances of the candidate list with thresholds which might exceed 0,1 % mass percent.
Further information about the candidate list can be found here: http://echa.europa.eu/de/candidate-list-table
In the future Safety Data Sheets will not only required for "hazardous" substances and preparations but also for persistent bioaccumulative and toxic (PBT) substances and very persistent and very bioaccumulative (vPvB) substances and preparations which contain those substances in concentrations > 0,1 mass%. We request our suppliers to submit an updated Safety Data Sheet acc. to REACh article 31 with annex II without further notice.
Legal and customer specific demands in respect of environmental friendly products increase continuously. This requires close cooperation with you as a supplier. The ‘hazardous Substances List’ contains substances which use is banned by law. The list provides a facilitated abstract of legal bans and restrictions about putting into the market dangerous substances in the EU and in other countries. This list contains an incomplete but for the Klauke group relevant selection of substances. Some substances have legal bans on specific applications or on the other hand special exemptions are permitted. Observing the ‚Hazardous substances list’ constitutes an important part of the conditions of delivery, so please download the list of prohibited substances(pdf) file.
Download:Klauke declaration of Conformity to EU REACH-Regulation 1907/2006 (pdf)
Download:Regulation (EG) Nr. 1907/2006(link)
The RoHS guideline 2011/65/EC (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) dated June 8th, 2011 Manufacture's must ensure that from July 1st, 2006 new electrical and electronic equipment put on the market does not contain more than 0.1 percent lead by weight of mercury, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) and 0.01 percent by weight of cadmium per homogeneous material. Exemptions for specific applications are listed in the annex of the guideline. The RoHS II Compliance is confirmed in the CE declaration and documented the tool by the CE sign.
Since 2007, 85% of all automotive parts have had to be recyclable. As stipulated by the EU Directive for the automotive industry and its suppliers. Furthermore, the use of numerous substances that are harmful to both health and the environment, including lead, cadmium, hexavalent chromium and mercury, is forbidden. Klauke supports this directive and uses none of the stated substances for its products - and of course not just in the automotive sector, but also in all of our Business Units.
Download:Regulation 2000/53/EG (pdf)
The course for a component's further use is set long before a component finally reaches the end of its useful life. Even during the tool development phase, we plan and design our products and their components for a high reuse and recycling quota.
The guideline 2012/19/EG intended to limit the amount of waste from electrical and electronic equipment. Material recycling, energy recycling and other efficiencies are promoted. Recycling rates were determined which vary from product group to product group and which must be complied with by December 31st, 2006. The manufacturer's must guarantee the collection, the treatment and the recycling of those units mentioned in annex IA of the WEEE guideline for those products which have been put on the market after August 13th, 2005.
Klauke has no legal obligation to take care of their WEEE outside Germany unless the product has been shipped and invoiced from inside your country by Klauke. Please contact your distributer to find out more how to get your tool recycled environmentally friendly.