EK 50 ML Electromechanical crimping tool

EK 50 ML Electromechanical crimping tool

  • The Klauke micro with intuitive PowerSense function combines the benefits of manual crimping pliers with the convenience of battery powered hydraulic crimping tools
  • Excellent crimps with minimum effort
Show Less
Read More

Features

  • One-button operating concept for controlling all tool functions
  • PowerSense function: Manual pre-clamping by hand, motorised crimping
  • Electronic control with locking function monitors full closing of the interchangeable dies
  • Ergonomic 2C housing in the Klauke "In-line Design"
  • Tool fixing point for use with balancer aid or lanyard
  • Very low weight and high speed for maximum efficiency
  • Powerful drive technology for effortless operations
  • Powerful 10.8 V Li-Ion battery with charge status display
  • LED for work area illumination
  • Maintenance display via LED

suitable for

  • 50-series interchangeable crimping dies

Specifications

Crimping force max. 15 kN
Crimping range 0.14 - 50 mm²
Crimping cycle < 1.5 sec. (based on connection material)
Number of crimps 400 at 10 mm²
Battery voltage 10.8 V
Battery capacity 2.5 Ah, Li-Ion
Battery charging time approx. 45 min.
Weight including battery 0.96 kg
Ambient temperature -10 °C to + 40 °C
*Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

Compatibility

Tubular cable lugs and connectors - Cu
{{model}}
suitable for Connecting material Crimping range mm² Crimping profile Crimping dies available
Tubular cable lugs and connectors - Cu, standard design 
0,75 - 10 
Crimping dies R 50, indent crimping
Tubular cable lugs and connectors - Cu, standard design 
6 - 25 
Crimping dies R 50, hexagonal crimp
Tubular cable lugs and compression joints for solid conductors - Cu 
1,5 - 10 
Crimping dies M 50
Compression cable lugs and connectors to DIN - Cu
{{model}}
suitable for Connecting material Crimping range mm² Crimping profile Crimping dies available
Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu 
6 - 25 
Crimping dies D 50
Solderless terminals, connectors and pin terminals to DIN - Cu
{{model}}
suitable for Connecting material Crimping range mm² Crimping profile Crimping dies available
Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu 
0,5 - 10 
Crimping dies Q 50
Isolierte Quetschkabelschuhe und Verbinder 
10 - 16 
Crimping dies IS 50, simple crimping
Cable end-sleeves
{{model}}
suitable for Connecting material Crimping range mm² Crimping profile Crimping dies available
Cable end sleeves 
0,5 - 50 
Crimping dies AE 507
Zwillings-Aderendhülsen 
2 x 6 - 2 x 16 
Crimping dies ZAE 507
Cable connections, insulated and non-insulated
{{model}}
suitable for Connecting material Crimping range mm² Crimping profile Crimping dies available
Insulated cable connections, single crimping 
0,5 - 16 
Crimping dies IS 50, simple crimping
Insulated cable connections, double crimping 
0,5 - 6 
Crimping dies IS 50, double crimping
Non-insulated receptacles 
0,25 - 6 
Crimping dies CR 50
For stud and shielded sleeves, BNC plugs for coax cable RG 58, 59, 62 and 71    Crimping dies BNC 50
Turned pin receptacle, pin connectors  0,1 - 4 
Crimping dies SB 50

Ordering Information

Ordering information
{{model}}
PART NO. Description
EK50ML Electromechanical crimping tool 0.14 - 50 mm² 
Variants
{{model}}
PART NO. Description
LBOXXEK50ML L-BOXX with electromechanical crimping tool EK 50 ML 0.14 - 50 mm² and extensive additional equipment 
EK50ML-L Electromechanical crimping tool 0.14 - 50 mm² with RAML1 battery, without charger, crimping die, case 
Scope of delivery for EK50ML
{{model}}
PART NO. Description
IS5071 Crimping die for insulated connector 0.5 - 6 mm² 
KKEK50ML Hard plastic carrying case 
LGML1 Charger for 10.8 V Li-Ion batteries, 230V 
RAML1225 Akku 10,8 V / 2,5 Ah, Li-Ion (27 Wh)