K 35/4 Crimping tool for replaceable dies 6 - 150 mm²
- Hoher Komfort: werkzeugloser Presseinsatzwechsel
- Optimal für den Muffen- und Schaltschrankbau
- Kraftsparender, wartungsarmer mechanischer Antrieb
Show Less
Read More
Features
- Schmalpressung
- Geringerer Kraftaufwand durch verlängerbare Teleskopgriffe
- Flexibler Einsatz: Kopf 360° drehbar
- Schneller Presseinsatzwechsel ohne Nachjustierung durch spezielles Fixiersystem
Specifications
| Länge | stufenlos 420-590 mm |
| Gewicht | 1,9 kg |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
Support Documents
Operator’s Manual
K35/4-Operating Instructions
(810.01 KB)
Compatibility
Tubular cable lugs and connectors – Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Copper tubular cable lugs and connectors, standard design, tubular cable lugs for switch cabinet connections |
|
6 - 150 |
|
Crimping dies HR 4 |
| Insulated cable lugs and compression joints, standard type, insulated pin terminals |
|
10 - 70 |
|
Crimping dies HIS 4 |
| Tubular cable lugs and connectors for fine stranded conductors |
|
10 - 35 |
|
Crimping dies HF 4 |
Tubular cable lugs and connectors - Ni, VA
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Tubular cable lugs and connectors – VA |
|
1,5 - 2,5 |
|
Crimping dies HN 4, indent crimping |
| Tubular cable lugs and connectors – VA |
|
4 - 16 |
|
Crimping dies HN 4, double indent crimp |
| Tubular cable lugs and connectors - Ni |
|
1,5 - 2,5 |
|
- |
| Tubular cable lugs and connectors - Ni |
|
4 - 16 |
|
- |
Compression cable lugs and connectors to DIN - Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu |
|
6 - 120 |
|
Crimping dies HD 4 |
Solderless terminals, connectors and pin terminals to DIN - Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu |
|
10 - 35 |
|
Crimping dies HQ 4 |
| Insulated solderless terminals and connectors |
|
10 - 16 |
|
Crimping dies HISQ 4 |
Sleeves for compacted conductors and sector shaped conductors – Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Pre-rounding dies for sector-shaped Al and Cu conductors |
|
16 sm - 150 se / 120 sm |
|
Crimping dies HRU 4 |
Compression cable lugs and connectors acc. to DIN
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Compression cable lugs and connectors according to DIN - Al |
|
10 rm/sm, 95 re/se |
|
Crimping dies HA 4 |
Compression cable lugs and connectors - Al/Cu
| suitable for | Connecting material | Crimping range mm² | Crimping profile |
|---|---|---|---|
| Aluminium side: HA4 crimping dies; copper side: HD4 crimping dies |
|
10 rm/sm, 95 re/se |
|
Clamping
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| C-type terminal clamps |
|
10 - 35 |
|
Crimping dies HC 4 / HMC 4 |
Cable end-sleeves
| suitable for | Connecting material | Crimping range mm² | Crimping profile | Crimping dies available |
|---|---|---|---|---|
| Cable end sleeves |
|
10 - 50 |
|
Crimping dies HAES 4 |
Ordering Information
Order Information
| PART NO. | Description |
|---|---|
| K354 | Crimping tool for interchangeable dies 6 - 150 mm² |
Accessories
| PART NO. | Description |
|---|---|
| SK65L | Steel carrying case |