SB pressing jaw Standard 32 kN
- Minimal wear due to additional inductive-hardening of wear points on infeed chamfers and crimping profiles
Read More
Features
- Simple assignment of crimping jaws and profiles thanks to coding with nominal size, profile and production data
- Easy to differentiate between the system-related profiles thanks to different surface colours
- Better corrosion protection thanks to special surface finish
- Optimised safety thanks to the use of high-resilience tool steel
suitable for
- Stainless steel, steel: max. NS22* (NS28* upon request)
- Copper, copper alloys: max. NS28*
- Composite/PEX pipe: max. NS32*
Additional information
- * These values are system-related. Please contact your system provider for binding information.
- Further profiles upon request
Specifications
| Linear force | 32 kN kN |
| Compatible crimping jaws, crimping chains | UAP332, UAP432, UAP4, UAP3, UAP2/UNP2, HPU2, PKUap2 |
| Article description | Crimping jaw, standard |
| *Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |
Support Documents
Operator’s Manual
UAP332CFB-Operating Instructions
(9.87 MB)
UAP332CFM-Operating Instructions
(10.33 MB)
Ordering Information
Ordering information
| PART NO. | Description |
|---|---|
| SB15M | Crimping jaw, standard |
| SB18M | Crimping jaw, standard |
| SB22M | Crimping jaw, standard |
| SB28M | Crimping jaw, standard |
| SB35M | Crimping jaw, standard |
| ohne-42mm | Crimping jaw, standard |
| ohne-54mm | Crimping jaw, standard |
| SB15V | Crimping jaw, standard |
| SB18V | Crimping jaw, standard |
| SB22V | Crimping jaw, standard |
| SB28V | Crimping jaw, standard |
| SB35V | Crimping jaw, standard |
| SB42V | Crimping jaw, standard |
| SB54V | Crimping jaw, standard |
| SB16U | Crimping jaw, standard |
| SB18U | Crimping jaw, standard |
| SB20U | Crimping jaw, standard |
| SB25U | Crimping jaw, standard |
| SB32U | Crimping jaw, standard |
| SB40U | Crimping jaw, standard |
| SB50U | Crimping jaw, standard |
| SB16TH | Crimping jaw, standard |
| SB20TH | Crimping jaw, standard |
| SB25TH | Crimping jaw, standard |
| SB26TH | Crimping jaw, standard |
| SB32TH | Crimping jaw, standard |
| SB40TH | Crimping jaw, standard |
| SB50TH | Crimping jaw, standard |
Relation
| PART NO. | Description |
|---|---|
| UAP332CFB | Universal battery-powered hydraulic pressing tool with Bosch battery, 32 kN |
| UAP332CFM | Universal battery-powered hydraulic pressing tool with Makita battery, 32 kN |
| HPU2 | Manual hydraulic pressing tool, to 110 mm |